HM Demogorgan

Specifications:
- Power: 9-12V @ 300-250mA center-negative power supply
- Input Impedance: 1MΩ
- Output Impedance: 1KΩ
- Soft-touch Silent Switching
- Buffered Bypass
- Top mounted jack
- Handmade in Niles Illinois

Description:

The HM Demogorgon is an expansion on the HM Demon which is an HM-2 with much needed improvements. With hi-gain pedals, they tend to become much more usable with a clean blend. This is especially true for bassists. So of course I added a clean blend and integrated it into the pedal. The clean signal can be blended pre and post eq stage. This allows for your clean signal to obtain the infamous chainsaw eq as the distortion stage. In post mode, the clean blend acts as a classic clean blend. The clean signal can also be boosted past unity with the Clean knob. This also aides in mixing the two signals together and can allow for the pedal to be turned into a preamp or a chainsaw boost. The graphic equalizer has 7 bands with a +/-15dB gain range which can be added on top of the demon eq. Thanks to the order switch, The equalizer can be place before or after the distortion. The two sections can also be used independently. The HM Demogorgon has no shortage of options and infinite possibilities for tone!

Controls:

Distort: Distortion volume control
Gain: Distortion gain control
Clean: Clean signal control w/ 20dB of boost available
Low: Low eq control with +/-15dB of boost available
Mid: Mid eq control with +/-15dB of boost available
High: High eq control with +/-15dB of boost available
Low Freq: Changes Low center frequency from 60 to 100Hz
Mid Freq: Changes Mid center frequency from 250 to 500Hz
Post/Pre: Changes the Clean Mix location from post to pre eq stage
Equalizer bands: +/-15dB at 50Hz, 100Hz, 250Hz, 500Hz, 1KHz, 3KHz, and 6KHz